Direct Replacement for Rheem / Ruud Inducer Motor Blower Motor 70-24157-03

Features:

* Shaded Pole
* Single Speed
* 60 HZ
* Automatic Overload
* Single Phase


Item Specifications:

Speeds 1
Volts 120
Amps 1.71
Rotation CCWLE
RPM 3000
Bearings Ball
Enclosure Open
Motor Type Shaded Pole
Frame 3.3
Overload Automatic
Phase 1
Hertz 60

This Item Replaces

Ametek: 117104-01, 117104-08, 117847-07
Fasco: 7062-1881, 7062-2513, 7062-2615, 7062-4534, 7062-4702
ICP: 1690042
Mars: 10701
Rheem: 117104-01, 5C089, 4MF46, 117847-07, FB-RFB142, 70-22162-81,
70-22165-81, 70-22838-02, 70-22838-82, 70-24149-01, 70-24157-03,
70-24175-81

Note: There are many furnaces that may use this Inducer OR (70-101087-81).
The difference is the 70-24157-03 has a port to be able to use this Inducer
for Standing Pilot systems whereas the 70-101087-81 does not have this port
therefore it can not be used for standing pilot systems. So if you have Hot
Surface or Spark Ignition you can order the 70-10187-81. Prior to a date
code of 6/1/2002 use the 70-24157-03 shown on the next description below.
After a date code of 6/1/2002 use 70-101087-81 in the description above. To
figure out your date code - Your serial number will look something like
this example CB5D302 F099903346 Look at the F in the serial number. The
next (2) digits are the week of production and the next 2 digits is the
year it was made. So in this example the furnace was made the 9th week of
1999.

Note: Induced Draft Blowers were re-designed after date code F2192 to no
longer include the mounting molding for the Vent Safety Switch. The Vent
Safety Switch is not required on replacement induced draft blower motors.
Remove the wiring flag connectors and connect the wires together.

You may contact us for help in