Adorabae iPhone XR Screen Replacement 6.1'' inch LCD COF with Back Plate Pre-Installed Small Part Ear Mesh Camera & Sensor Holder Touch Screen Digitizer Full Assembly Kit with Repair Tools

LCD/OLED replacement screenHigh-quality magnetic screwdriver repair tool kitSim card pinRepair instruction guideHigh brightness, sunlight readabilityWide color temperature, high color saturation and wide gamutLower power consumption9H front glass, anti-dust and fingerprint oilTouch sensitivity 1:16.1-inch all-screen LCD multi-touch display IPS technology1792-by-828-pixel resolution at 326 ppi1400:1 contrast ratio (typical) 625 cd/m2 max brightness (typical)LCD with 3D touch functionPerfect assemblingWhen you received the screen, please check whether the screen and the flex cable are in good condition.Before installing, you must turn off your phone, and please dont bend the cable in a wrong way.Since each screws are not identical, please remember each screws location and not to put them at the wrong places in order to avoid screen damage.If you are unfamiliar with installing screens, please watch the installation tutorial on Youtube before you replace the screen.Do not apply pressure to the corners of the screen panel, or violently force the screen into the back case. Such behaviors could easily damage the screen.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connectors.Disconnect and reconnect the flex cables from the motherboard side.Then Reboot: Hold buttons (Home, Up volume, and Power button) until the phone switch down and then switch up again.Leave the phone alone for a while in a dry environment. Sometimes there is static after installing that will go away, you can try to leave the phone for a night.