Stud Finder Sensor Wall Scanner -4 in 1 Electronic Stud Posi Tioner with Digital LCD Display, Central Positioning Stud Sensor and Sound Alarm are Display for Wood AC Wire Metal Studs Detection
*➤The most accurate and higher safety - stud detector is specially designed! The most advanced sensor technology is used to accurately and quickly locate the metal pipes, fire lines, studs, wooden frames, steel bars and supporting beams hidden behind walls, floors and ceilings. Whether you are a professional, homeowner or DIY enthusiast, you can find a good use in this electronic screw scanner
*➤The wall scanner includes five different scanning modes, suitable for metal tubes, fire lines, studs, wooden frames, steel bars and brackets, as well as ceilings, deep embedded objects behind walls. The bolt mode can detect wooden beams and joists in the dry wall, up to 1.5 inches. Metal mode can detect up to 3 inches of pipe. Depth mode detects up to 3 inches of wood and metal components, while 85 to 240 volts of AC current can be used for up to 2 inches of voltage and live wire
*➤Auto-calibration and ergonomic grip, comfortable to use, before testing, please hold down the scan button for 1-2 seconds. Auto-calibration provides maximum reliability and accuracy for users. The ergonomic design of this wall stud detector enables it to be fixed from any angle
*➤LCD screen upgrade design, display the required stud material and the exact position of the stud - Digital stud scanner with large LCD display and loud warning, can detect the exact position of the object. When the material is found, the LCD display will beep to tell you if you are close to the target. Fast detection saves time and energy for users and makes task completion easier
*➤Professional Design with Top Quality - FOLAI has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. This stud joist finder wall detector can quickly locate the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you find the exact stud while installing TVs, cabinets, garage shelves etc
WHY YOU SHOULD BUY THIS DETECTOR:
✓Locates stud center and edges
✓locates metal and wood parts
✓AC scan mode for live wire tracing
✓Auto power-off within 3 minutes (If there's no operation )
✓Backlit screen
STEPS:
1、Choose the correct mode according your needed: stud, metal or AC wire
2、Get it calibrated before using
3、Move slowly to find objects
4、Beep sound and center column will tell you where the center is.
DETECTION CAPABILITY:
Stud :1.5-inch behind wall
AC live wire: 2-inch
Metals: 3-inch
PACKAGE CONTENT:
*1 x Stud finder
*1 x User manual
*1 x 9V battery
The wall detector features large LCD display, ergonomic design and multi-sense technology for accurate detection of both metal and wooden studs. It will also detect live wiring up to two inches into walls. The four scanning modes (stud scan, deep scan, metal scan and AC scan) make it ideal for both tradesmen and home carpenters. With this device, you can immediately find a suitable place on the wall without making any extra holes
We suggest you to use Stud Mode first to find the edges of wood and metal studs up to 3/4 inches (19mm) deep. If Stud Scan mode shows irregular readings or the Signal Strength indicator is weak, the studs might be behind more than ¾ inches (19 mm) of drywall.then switch to Deep Scan mode. This doubles the scanning depth to 1½ inches (38 mm) deep and allows for increased accuracy on deeper targets.
Use this mode to locate and avoid hazards such as pipes behind walls. Metal Scan mode detects non-ferrous metal such as copper pipe up to 1½ inches (38 mm) deep, and ferrous metal such as rebar, up to 2.36 inches (60 mm) deep. You can differentiate between metal and wood studs through this mode.
First, find the stud in Stud Scan mode. Then, switch to Metal Scan mode, the tool alerts in a pattern as it detects the mental drywall screws in the wood for wooden studs.
In this mode detect live, unshielded AC wires, electrical wires up to 2 inches (51 mm) deep.
For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.
Note: Wire Warning Detection works in both StudScan / DeepScan / MetalScan Modes. The Wire Warning Detection Icon will flash when live, unshielded wires are detected.
Place the unit flat on the wall, press and hold the scan button to start calibration, the decreasing bars will disappear and buzzer will beep one time and the calibration is completed.
Slowly slide tool across the wall. A bottom pointed arrow and EDGE indication will illuminate, indicating location of the stud edge.
Continue sliding the tool. When the center of a stud is located, the full bars on the Signal Strength Indicator, the pointed arrow on the top of the bars, the CENTER indication will all show and the buzzer will sound.
WHY YOU SHOULD BUY THIS DETECTOR:
✓Locates stud center and edges
✓locates metal and wood parts
✓AC scan mode for live wire tracing
✓Auto power-off within 3 minutes (If there's no operation )
✓Backlit screen
STEPS:
1、Choose the correct mode according your needed: stud, metal or AC wire
2、Get it calibrated before using
3、Move slowly to find objects
4、Beep sound and center column will tell you where the center is.
DETECTION CAPABILITY:
Stud :1.5-inch behind wall
AC live wire: 2-inch
Metals: 3-inch
PACKAGE CONTENT:
*1 x Stud finder
*1 x User manual
*1 x 9V battery
