Floratek 5-Pack Thermal Pad, Silicone Thermal Conductive Sheets Heatsink 100x100x2mm for IC SSD CPU GPU Raspberry Pi LED Chipset Cooling
*High thermal conductivity rate, insulation, viscosity, elasticity, low heat resistance, filling, meets most electronic products heat conduction insulation requirements.
*Reduce the effectiveness of your heatsink and raise the operating temperature of your processor/video card. With this pad to greatly lower gpu temperatures, can be used for graphics, northbridge,memory chipset,IC chips.
*5 piece 100x100x2mm Soft Thermal Conductive Pads included. Thermal Conductivity: 1.5w/m-K,Tensile Strength: 12Kgf/cm2, in -50 ℃ - 200 ℃ will not melt.
*Specially designed for the use of interval heat transfer design, can fill intervals, effective heat transfer of heating parts to the radiator.
*Widely suit for CPU, GPU, Heat Sink,laptop, DVD, VCD, LID,Control board, motor, electronics, Power LED, auto mechanics, computer host, Set-top box, LED IC SMD DIP and any cooling modules.
Specification:
Size: 100x100mm
Thickness:2mm
Color: Blue
Material: Conduction silicone
Continuous Temp: -50 Degrees-200 Degrees
Thermal Conductivity: 1.5w/m-K
Users Manual:
1.Clean the surface, it will be glued or cleaned by the surface of the object to remove dust and oil.
2.Tear protective film
Remove the protective film on one side of the product ( do not tear the protective film on both sides at the same time, reducing the number and area of direct contact with the silicone sheet to avoid damage to the viscosity and thermal conductivity of the product.)
3.Fixed heat sink
Remove the protective film from the other side, apply a certain pressure to the heat sink after installation, and then fix it with screws.
Package Include:
5 x Thermal Conductive Pads
