Youliang 1PC TEC1-12706 Thermoelectric Cooler Heat Sink Cooling Peltier 12V 5.8A 40x40mm

Specifications:
Model: TEC1-12706.
Voltage: 12V.
Umax (V): 15V.
Imax (A): 4.3-4.6A.
Cooling Power: Qcmax 60-72W.
Heating Power: QMax 92W.
Internal resistance: 2.1~2.4 Ohm.
Maximum Temperature(Qc=0): up to 65 Degree Centigrade.
Operates Temperature: -50 Degree Centigrade to 80 Degree Centigrade.
Net Weight: 25g.
Size: Approx. 40mm x 40mm x 3.8mm.
Color: White.
Package Included:1 PC.
Installation:
A semiconductor refrigerator (TE), also called a thermoelectric cooler, is a heat pump. It has the advantage of not having mechanically operated components, and is used in applications where space is limited, reliability is high, and refrigerant is not contaminated.
Semiconductor refrigerators have the following advantages and features in technical applications:
1. No need for any refrigerant, long life and easy installation.
2. The semiconductor refrigerator has two functions of cooling and heating.
Cooling piece is very simple to install and use. Before installation, to find a dry cell, connected to the two leads of the cooler, obviously cold you can feel at one end and the other end of fever, remember that the polarity of the lead and determine a good cooler cold and hot end. If you want to get a bigger system Ling, it is recommended that two cooling mode, with two stack up with the above, a grim absorption following a fever, the experiments prove two refrigeration effect is much better than the single-stage, the condition can choose three, of course, have a large power supply support.
Note:
1.The surface of the heat sink is a cold surface, and the surface without a word is a hot surface.
2.Always apply thermal grease when installing the heat sink.
3.A heat sink or a water-cooling heat sink must be installed on the heat sink surface, otherwise it will burn out.