CHPOWER PTFE Bowden Tubing (2 Meter) XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter + Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and Collet Clip
Availability: Pre-Order, Inquiry Price
*CHPOWER PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend.
*High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
*Upgraded Pneumatic Fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer manufacturers with plastic teeth or cheap locking mechanisms. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10.
*One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
*High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL.
Description:
Official CHPOWER Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise internal diameter. When printing flexible filaments in a bowden system, the inside diameter of bowden liner is one of the critical feature for the successful print.
CHPOWER PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. Standard PTFE tubing may experience dangerous “off-gassing” if the hotend is heated to temperatures beyond 240*C and will get worse with higher heats. This CHPOWER XS series is safe in 3D printer usage up to 300*C thanks to its proprietary manufacturing methods.
Specification:
- Tube length: 2 Meter
- Inside Hole Diameter: 2mm
- Suitable for 1.75mm filament
- Outside Tube Diameter: 4mm
Package included:
1x CHPOWER Bowden PTFE Tube
1x Tube Cutter
2x PC4-M6 Fittings
2x PC4-M10 Fittings
