Hicarer High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands (Gold)
*Clock movement: high torque clock movement with hook, long shaft, drive long clock hands (10 mm to 450 mm)
*Total shaft length: 28 mm (1-1/ 10 inches), thread length: 15.4 mm (3/ 5 inches), suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel
*Size from the center of the hole to the tip: the hour hand is approx. 203 mm/ 8.0 inches long; The minute hand is about 305 mm/ 12 inches in length
*Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork materials to make a clock by yourself
*Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent
High torque long shaft clock movement mechanism with 12 inch long spade hands
Kindly reminder:
There is a printing mistake in the instruction; The 8th instruction is wrong; Our package not includes screw minute nut; We are sorry for any convenience being brought to you.
Features:
Total shaft length is 28 mm and its thread length is 15.4 mm, applicable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel.
Application:
You can use the clock movement to repair, replace or make a clock, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc..
Easy and simple design:
The component parts are easy to assemble together and the black metal hands can be painted with any color to match your clock.
Specifications:
Material: plastic and aluminum
Case size: approx. 55 x 55 x 16 mm (2.2 x 2.2 x 0.63 inches)
Hour hand length: total length is 216 mm/ 8.5 inch; Center hole to the tip is 203 mm/ 8.0 inch
Minute hand length: total length is 385 mm/ 15.2 inch; Center hole to the tip is 305 mm/ 12 inch
Power: 1.5V AA 1 x battery (not included)
Package includes:
1 x Quartz clock movement
1 x Close nuts
1 x Minute hand
1 x Hour hand
1 x Plastic washer
1 x Brass washer
1 x Brass nut
1 x Metal hook
Warm notice:
There are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent.
