TotalBoat Wet Edge Marine Topside Paint for Boats, Fiberglass, and Wood (Black, Quart)
*DURABLE, HIGH-GLOSS MARINE GRADE PAINT provides a beautiful, scratch resistant, chemical resistant, uv resistant finish with maximum color and gloss retention
*EASY TO APPLY: 1-Part formula provides professional results with just a brush and roller (roll & tip method); can also be applied by spraying; for use above the waterline
*SELF-LEVELING, ABRASION RESISTANT POLYURETHANE FINISH is easy to clean & resists staining; will not fade, crack, or peel; easy to touch up; ideal for power boat hulls, sailboat hulls, campers, RV exteriors, doors and trim
*VERSATILE TOPSIDE PAINT: Wet Edge looks great on fiberglass, wood, metals, and previously painted surfaces; not for continuous submersion on boat bottoms that remain in the water longer than 72 hours
*CHOOSE FROM 21 POPULAR HIGH GLOSS COLORS in Pints, Quarts & Gallons. Coverage: 350-400 sq. ft./gal. (White, Black & Gray also available in flat finish). Primer: TotalBoat Topside Primer or TotalProtect (metals)
TotalBoat Wet Edge Topside Marine Boat Paint is an easy-to-use, 1-component, polyurethane marine grade paint that provides a beautiful, brilliant, resilient, high-gloss finish on hulls, cabin tops, consoles and other topside surfaces above the waterline. Use on fiberglass, wood, metals and previously painted surfaces in good condition. Its UV resistant formula provides excellent weather resistance so the finish retains its superior color quality and gloss. Once cured, the extremely durable finish will not fade, lift, crack, or peel. The high-solids content in Wet Edge makes it look better and last longer. It's also why you need to apply thin coats - 2 to 3 coats are all you need for long-lasting beauty and shine. Wet Edge gives you the high gloss and durability of a 2-part polyurethane without all the hard work. It's very easy to apply, has excellent flow out, and dries perfectly smooth. For best results, prime bare wood or previously painted surfaces with TotalBoat Premium Topside Primer. Use TotalBoat Dewaxer & Surface Prep as a solvent wipe to remove grease, oil and other contaminants. Wet Edge may be thinned with TotalBoat Special Brushing Thinner 100 (brush/roll application) or xylene (spray application). Application temperature is 50-90 degrees F. Wet Edge is also compatible with non-skid additives and flattening agents for 1-component polyurethane paint. Compare Wet Edge marine paint for fiberglass boats to Interlux Brightside Polyurethane, Pettit Easypoxy and Pettit EZPoxy, Rustoleum Marine Topside Paint, Duralux Marine Paint and Epifanes Monourethane. Wet Edge offers superior durability, color retention, gloss retention, and weather resistance, which also makes it an ideal canoe paint, kayak paint, camper paint, rv exterior paint, or golf cart paint. For an excellent aluminum boat paint, use TotalBoat Aluminum Boat Topside Paint. All TotalBoat products are developed for boaters by boaters, to provide great value and great results. 100% made in the USA.
<
