Onepine 32 Pieces Bath Bomb Mold Kit 16 Set 3 Sizes DIY Metal Mold for Homemade Bath Bombs (32 Pieces / 16 Set)

Onepine Making your own bath bomb is a fun new hobby. Using these aluminum alloy molds can make the bath bomb effective compression plasticity, and the smooth inner surface can make the bath bomb easy to demould !

Specifications:
Material: Aluminum alloy
Color: Silver
Product Size:
S: 4.5cm / 1.8inch
M: 5.5cm / 2.2inch
L: 6.5cm / 2.6inch

Quantity:
4 set x 1.8 inch Bath Bomb Mold
8 set x 2.2 inch Bath Bomb Mold
4 set x 2.6 inch Bath Bomb Mold

Bath bomb mold usage
Step 1: Fill your blended ingredients into each aluminum semi-circular mold until it spills slightly
Step 2: Combine the two semicircular dies together and press the mixture tightly into the mold with a large amount of pressure to prevent cracking
Step 3: Wipe off excess mixture on the outer edge of the mold
Step 4: After half an hour in the refrigerator, gently tap the mold with your finger
Step 5:Gently remove one side of the mold, then gently invert the bathtub bomb so that the uncovered side is facing down, then gently remove the other half of the mold from the top.A complete bath bomb was made successfully!

Note:
? Do not hit the mold with a metal spoon
? Do not use irritating chemicals or dishwashers