Corro-Protec CP-R Water Heater Powered Titanium Anode Rod (40-89 Gallon Tank) - Eliminate Odor (Sulfur/rotten egg smell), Corrosion and Reduce Limescale
About this product
*SAY GOODBYE TO ODORS – Eliminate your water heat odor problem by removing the rotten egg smell caused by hydrogen sulfide with our advanced powered anode rod.
*PERMANENT CORROSION PROTECTION – Designed to replace your 40-89-gallon water heater’s hex head anode rod, it can help defend against any level of water hardness.
*ENERGY EFFICIENT DESIGN – By reducing mineral accumulation on the tank it can help improve the water quality while reducing stress on the tank to reduce energy costs.
*QUICK AND EASY INSTALLATION – We’ve included an easy-to-follow paper and step-by-step online PDF instructions to make installing your anode rod much easier. You will need a 1 1/16 socket to remove the magnesium anode as well as a 1 3/16 (or 31mm) socket to install The Corro-Protec
*WARRANTY & QUALITY – Manufactured right here in Canada, our hot water heater anode rod not only extends the life of your tank but is backed by a 20-year warranty.
Description
DO YOU HAVE SMELLY WATER?
The Corro-Protec Powered Anode made of titanium is a long-term solution to preventing sulfide smells (that rotten egg smell) produced by well water.
Aggressive well water and the use of softeners contribute to the sacrificing of passive anodes (magnesium, aluminum, and aluminum/zinc) much quicker, generally requiring replacement every 2-5 years.
PERMANENT SOLUTION TO ROTTEN EGG SMELL
By replacing your existing anode with Corro-Protec Powered Anode Rod it may be the last anode you ever buy! We back our claim with a 20-year warranty.
INSTALLATION NOTES:
Turn off electrical power supplyTurn off water supplyRemove the water pressure from the tankRemove the magnesium anodeInstall Teflon tape on the lower portion of the Corro-ProtecInsert and screw the Corro-ProtecInstall the ground on the hot water tankConnect the Corro-Protec Anode on the rectifierConnect the rectifier<Related Products
