Shueriu Train Horn - 4-Trumpet 180 psi Air System 150dB+ 10 L Metal 12V Train Horns kit for Trucks Air Horn for Any 12V Vehicles Trucks Lorrys Trains Boats Cars Black
Availability: Pre-Order, Inquiry Price
About this product
*【EXCELLENT QUALITY】The air horn is made of high-quality zinc material and chrome-plated metal to ensure maximum strength and durability, and can be used for a long time. Fuel tank capacity: 10 liters, compressor cylinder diameter 60MM, the compressor is equipped with a temperature timer to protect the air pump to avoid damage.Equipped with professional pressure switch, rubber protection, unique drain valve.
*【150DB LOUDSPEAKER & WIDE APPLICATION】According to the different air pressure, the sound of the speaker will reach 150DB. It can provide the loudest possible volume, and it can be heard clearly even at a long distance. The application range of the compressor is very wide. It can be used not only on train horns, but also for inflating car tires, and even some pneumatic tools can also be used.
*【180PSI COMPRESSOR】This kit includes a pump up to 180 psi. When the pressure drops to 90 psi, the compressor will start and pump to 180 psi, with an inflation rate of 160L per minute,compressor pumping speed is better than other compressors on the market. It is also equipped with a protection device, a petcock-type fuel tank dehumidification device, and an air hose for connecting the push-lock joint on the side of the air tank with the push-lock joint on the air horn.
*【PORTABLE HANDLE & EASY TO INSTALL】The compressor comes with a handle, which is convenient for you to carry when you need to use the compressor. The train horn kit is easy to install. The horn kit includes basic installation hardware, hoses, relays, you dont need to worry about buying hardware or relay installation. (Note: This product needs to be installed horizontally, please do not install it upside down or inclined.)
*【AFTER SALES SERVICE】If you have any questions about our products, please feel free to contact us, we will solve the problem for you within 24 hours to ensure your satisfaction.
Description
Installation Tips:
Face to the mouth of the hose connector and then bind it clockwise with the sealing tape for 3-5 circles. Then tightly screw up it with the connector of compressor and horn.
HOW TO USE:
1. Remove compressor, receiver drier or accumulator, orifice tube or expansion valve.
2. Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems THE VALVE MUST BE REMOVED before the evaporator can be flushed. FLUSHED CONDENSERS FROM OUTLET TO INLET AND EVAPORATORS FROM INLET TO OUTLET.
Warning: Newer Style condenser designs are very hard, and sometime it would be impossible to do flush, In those cases it is suggested that if the compressor has a major failure the condenser should be replaced.
3. Drain all the oil from the new compressor and dispose of according to local, state and federal laws. NOTE: if you compressor has a drain plug you will need to open it up and drain what oil is in there too.
4. Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated.
5. Install new receiver drier or accumulator and new orifice tube or expansion valve.
6. Evacuate the A/C system for a minimum of one hour.
7. After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system.
8. Start engine whit A/C controls on MAX AIR with door and windows open.
9. Add the remaining charge of refrigerant as called for by the manufacture.
Notice: No instructions attached, please make sure you know the install and connection methods before you buy it.
Package Contents:
1 x Air Horn
1 x Gas Pope Joint
1 x Air
Related Products
