Fuel pump fits Polaris Ranger replacement 500 700 800 fuel pump 2006-2010 W/regulator

Fuel pump factory Polaris Ranger 500 700 800 fuel pump with filter / regulator and strainer FITS 500 700 800 cc bikes and YEARS UP THRU 2010 WILL NOT FIT 2011 AND UP One new fuel pump One new fuel filter strainer * Ranger 500 EFI (All Versions) 2005- 2013 * Ranger 6x6 (All Versions) 2006-2010 * Ranger 700 EFI (All Versions) 2006-2010 * Ranger 800 EFI (All Versions) 2010 * RZR 800 (All Versions) 2008-2010 * RZR 800-S (All Versions) 2009-2010 This is a replacement fuel pump for all polaris rangers with efi. This pump is more reliable than the stock one that commonly fails under normal loads. Polaris requires you to purchase a new fuel tank to replace the fuel pump. This runs over $470 to get another tiny, not so good pump. Our pump installs just like your stock one. No wiring or modifications are needed. Install time is 20-30 minutes. THIS IS THE PUMP WE USE AND RECOMMEND FOR TURBO AND MODIFIED ENGINES. This pump flows about 35% more than the stock one does, so if you are making some serious power here is the answer to keep up with your fuel needs. Polaris calls for 39psi +-3psi. This means that if your pressure is not 36-42 psi you have a fuel pump issue. This is very common on these vehicles. Typically when the fuel pump fails it creates a problem with 25+ mph acceleration. Usually popping and sputtering. When checking your fuel pressure be sure to rev your engine and put it under a load if you can safely. Just because it makes pressure at idle doesn't mean it will make pressure when reved or under a load. The fuel pump is the number one issue we see with with the Polaris Ranger. One year no hassle warranty. THIS IS A DIRECT REPLACEMENT PUMP FOR YOUR POLARIS RANGER Replaces the following Polaris part numbers: * 1240382 * 1240239 * 2520595 * 2521011 * 2204306 SIMPLE PLUG AND PLAY. NO WIRING OR MODIFICATION NEEDED.