Leather Paring Machine Manual Leather Skiver Leather Splitter Skiver Leather Tool DIY Skiving Thinner Machine USA
Availability: Pre-Order, Inquiry Price
About this product
*【BLADE WIDTH】57mm-60mm (2.2-2.4) (Generally no more than 50mm / 2 cut leather as well, the best initial leather thickness is not exceeding 6mm / 0.24)
*【MAIN PARAMETERS】Style: Installed directly use style; Machine dimension: 18.5cm x 8cm x 5.5cm (7.3 x 3.2 x 2.2); Package size: 20cm x 11cm x 14cm (7.9 x 4.3 x 5.5); Package weight: 0.87kg / 1.9lbs.
*【WIDE APPLICATION】Handheld skiver, use for skiving edge, skiving thinner, segment skiving, entire piece skiving thinner. Fit for soft leather, hard leather, high-density leather. Applicable for home, tailor, factory, ect.【WIDE APPLICATION】Handheld skiver, use for skiving edge, skiving thinner, segment skiving, entire piece skiving thinner. Fit for soft leather, hard leather, high-density leather. Applicable for home, tailor, factory, ect.
*【BLADE INSTALLATION】Use a hex wrench to remove the fixing screws of blade clamp; Insert into the blade; Tighten the fixing screws; Viewed from the front,the relative position of the blade and rollers should be parallel.
*【SKIVING OPERATION】According to the thickness of the skiving, adjustment the screw of the handle; Open the handle, ut the leather between the roller and the blade; The position of the leather should be in the middle of the roller, the tablet can make the leather press against the surface of the roller; The right hand clenched the handle, pull to the right.
Description
Performance parameters:
Style: Installed directly use style
Blade width: 57mm-60mm (2.2''-2.4'')
(Generally no more than 50mm / 2'' cut leather as well, the best initial leather thickness is not exceeding 6mm / 0.24'')
Machine dimension: 18.5cm x 8cm x 5.5cm (7.3'' x 3.2'' x 2.2'')
Package size: 20cm x 11cm x 14cm (7.9'' x 4.3'' x 5.5'')
Package weight: 0.87kg / 1.9lbs
Applicable scene: Home, Tailor, Factory
Fit leather: Soft leather, Hard leather, High-density Leather
Function: Skiving edge, Skiving Thinner, Segment Skiving, Entire piece Skiving Thinner
Blade Installation:
1. Use a hex wrench to remove the fixing screws of blade clamp.
2. Insert into the blade.
3. Tighten the fixing screws.
4. Viewed from the front,the relative position of the blade and rollers should be parallel.
Skiving Operation:
1. According to the thickness of the skiving, adjustment the screw of the handle.
2. Open the handle, ut the leather between the roller and the blade.
3. The position of the leather should be in the middle of the roller, the tablet can make the leather press against the surface of the roller.
4. The right hand clenched the handle, pull to the right.
Package Included:
1 x set of Skiving Machine
Related Products
