Vila Beverage Dispenser Replacement Spigot, Stainless Steel No-Rust Spout, Installation under 10-Minutes, Excellent Continuous Flow, Sturdy, Stylish Alternative for Flimsy Plastic Taps
Availability: In Stock
About this product
*MULTIFUNCTION REPLACEMENT SPIGOT --- If you want to impress your guests with a neat, efficient drinks dispenser, you will love this 304-grade stainless steel replacement spigot by Vila. They can be used to dispense tea, wine, water, coffee, punch, or any other beverages! A great addition to outdoor parties, receptions, hotel dining rooms, or any other events.
*FITS ON MOST WATER CROCKS, GLASS JARS AND MORE --- You will need a 5/8 inch or 16mm diameter opening to install. These taps can be attached to most kombucha jugs, mason jar dispensers, stainless steel water crocks, hot water urns, and many other drink dispenser jugs.
*EXCELLENT FLOW WITH NO LEAKS --- Most mason jars or crocks come with plastic spigots, and these metal ones will not only look chic, but will dispense any juice or drinks more efficiently. Unlike plastic or low-quality spigots that tend to leak, crack or splash water or juice everywhere, these spigots have excellent continuous flow.
*DURABLE BEVERAGE FAUCET --- This Vila dispenser spout is made with grade 304 stainless steel which will not rust even after multiple uses. The raw material makes it durable to use for years to come. After using sugary drinks we strongly recommend rinsing in soapy water to ensure there is no sugary syrup left on the inside.
*QUICK AND EASY INSTALLATION --- Please wash the spigot before use. The spigot dispenser has a thread pitch of 1.25MM/0.05inch and rubber gaskets. This can be screwed into a 5/8 inch or 16mm diameter opening. If you have normal grip strength you do not need any tools. If you have weak hands use a 3/4 inch wrench for the nut, but do not over-tighten. Your metal and glass jar faucet will last a lifetime if you take proper care of it.
Description
Stop Dealing With that Plastic Spout
Admit it! We’ve all gone through the menace of tackling leaky, smelly, and all the more flimsy plastic spigot. But, not anymore! If we see, our common pain points with a plastic spigot can be segregated into the following kinds -
1. Plastic spigot leaks and if you tighten, it breaks.
2. Difficult to maneuver.
3. Plastic pollution and recycling is an issue.
4. Crud can settle with time on the surface leading to pungent odor in the beverage.
So if you have to upgrade, replace, improve water quality, or the beverage taste, have this stainless steel dispenser by your side. Because your old and degraded spigot can cause you health issues and impact your growth adversely.
Having a fast, efficient drinks dispenser on hand is perfect for keeping hydrated all day long. It's super easy to install and comes with a silicone washer/gasket which restrains any leaks and can withstand heat up to 390°F (200°C). The durable water dispenser replacement faucet can handle a 5-gallon water tank and dispense continuous water. With a twist of the knob, you can maneuver the flow.
This faucet will make dispensing the brew easier than pouring from the top of the jar or using ladles and siphons which makes the work messier.
How To Install:
Please take note that this Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits any dispenser wall which is up to 0.62" or 16mm thick.
The rubber washers need to be against the inside and outside surface of the glass to create a good seal. Keeping this in mind, you can convert even the tiniest of mason jar into a dispenser.
Specifications
2 stainless steel washers
2 silicone gaskets
- Material: 304 stainless steel
- Color: Sliver
-Thread Size: 5/8 inch or 16mm diameter
- Spout Opening: 10mm
- Total Length of Spigot - 100mm / 4-inches
Related Products
Push Style Spigot for Beverage Dispenser Carafe, Replacement Lever Pour Spout for Beverage Dispenser
MPM9528
