Full Motion TV Wall Mount Bracket Articulating Arms Swivels Tilts Extension Rotation for Most 13-55 Inch LED LCD Flat Curved Screen TVs, Max VESA 400x400mm up to 66lbs by Pipishell

Will the TV wall mount fit my TV?

First, please check your wall for wood studs, it can not be used on concrete wall or drywall alone. Anchor needed is for concrete wall installation.

Next, the weight of your TV should be less than 66lbs (30kg).

Then, mounting holes distance on the back of TV must be less than 16" (400mm) horizontally and 3" (75mm) vertically.

Your TV should be at least 13 inch. Otherwise, you will see the bracket.

In addition, please check the area inside the 4 mounting holes to make sure there are not any plugs. Otherwise, the plate may block the plugs.

Finally, please check possible blocked cable/input.

 

Specifications:

First, please check your wall for wood studs. You just only need a single stud to get it up on the wall. Of course! It can be mounted on concrete wall and brick wall, but you need to use anchors when installing.Next, the weight of your TV should be less than 66lbs/30kg and your TV should be at least 13 inch.Then, please check the VESA pattern, VESA = horizontal × vertical. Mounting holes distance on the back of TV must be less than 16" (400mm) horizontally and 16" (400mm) vertically.Finally, please check the TV back area inside the 4 mounting holes to make sure there are not any cables outlet. Otherwise, the plate may block the plugs.Fits 13" to 55" flat panel TVs/monitors and supports TV weight up to 66lbs/30kg.Supports all major brands including Samsung, LG, Sony, TCL, Vizio, Philips, Sharp, Hisense, Panasonic, Toshiba and more.Fits VESA mounting hole patterns: 400X400/400x300/400x200/300x300/300X200/200x200/200x100/100x100/75x75mm ( In inches: 16"X16"/16"x12"/16"x8"/12"x12"/ 12"x8"/8"x8"/8"x4"/4"x4"/3"x3").Made from high quality, reinforced, compressed steel and it has been stress tested to hold 4 times its weight based on UL standards.