CaNibble Drill Attachment Nibbler, For Flat & Corrugated Sheets Up To 14 Gauge, Safe, Versatile Multi-Direction Cutting

CaNibble is the only nibbler on the U.S Market with a patented cutting action. CaNibble - Professional Nibbler attaches to any standard drill (keyed or keyless chuck, corded or cordless) transforming it into a safe, easy to use, sheet metal cutting tool and is highly portable, bring it with you on a cordless drill. CaNibble’s Nibbler offers the tightest radius of cut available on the market and can cut complex profiles easily without disengaging the work piece There is NO distortion of material shape and NO burrs or sharp edges - this tool is SAFE. FAQ’s How thick is the material CaNibble can cut? The answer depends on the grade, and type of material being used. For Mild Steel it is 1.6mm (or 16 SWG) 0.063” For Brass, Aluminium, Plastic it is 2.0mm (or 14 SWG) 0.079” We recommend a specific punch and die are kept for Aluminium work For Stainless Steel it is 1.0mm Maximum (or 20 SWG) 0.039” We recommend a specific punch and die are kept for Stainless Steel work. Always apply a lubricant such as WD40 or light oil along the path of cut. What sort of Drill will I need to run my CaNibble? Any Power drill, electric or air with a 9mm chuck capacity and a speed range of 1,500 to 2,500 RPM. 1500 RPM is the recommended cutting speed for Stainless Steel 2500 RPM is recommended for Mild Steel, Aluminium and Plastic What can I do with it? Your CaNibble is ready for action, and will cut both corrugated and flat sheet metals. It will also cut plastics, Formica, chicken wire, even paper and cardboard, plus rounded and tubular sections of material. It will cut in straight lines, and in curves with a radius as small as 8mm (5/16”) without distortion or leaving sharp jagged edges. Its index-able die will adjust through 360 degrees quickly for different applications and access. What Guarantee does CaNibble offer? 5 years, excluding consumables – these are the replaceable punches and dies.